MCS Technique Service Website
October 23 2018 14:24:11
FLUIDWELL > PANEL MOUNT BATCH CONTROLLER




Fluidwell : Panel mount Batch Controllers


   Fluidwell : Panel mount Batch Controllers The N-Series use the highly appreciated configuration structure of our F- and D-Series. Each setting is clearly indicated with an alphanumerical description, eliminating confusing abbreviations. Once familiar with an N-series product, you will be able to program all models in all series without a manual. For example: the configuration menu of the (intrinsically safe) F-Series batch controllers operate almost identical to an N410! In other words: Know one, know them all. Operation and configuration is done via the easy-to-operate numerical keypad.
The unique LCD display provides multiple batch control data at a glance. The main information like actual value, flow rate or batched total are displayed with 7 large digits (14mm, 0.56"). The preset value and units of measure are displayed with 10 smaller segments (8mm, 0.3"). A graphical indication of the batch process and relay status are displayed simultaneously. On-screen engineering units are easily configured in the configuration menu. All values are saved in EEPROM memory. The N410 is standard provided with a bright backlight, which ensures good readings during day and night and it can be adjusted in 6 steps from 0 to 100%.
The N-Series is your perfect solution for smaller and low cost panels, as it has a limited depth clearance of only a four inches! Why bother with other panel controllers, when you can save considerably on installation and panel requirement costs with the N-series? Be smart, buy N!
All values, unit settings and functions have been classified in various groups and can be security access code protected. There is a special external input with a keypad lock functionality.

   Input features : Fluidwell - Panel mount Batch Controllers
■ The N-Series accept various input signals for volume flow or mass flowmeters, like reed-switch, Coil, open collector, NPN, PNP or active 8 / 12 / 24V pulse signals.
Various external inputs are available including functions such as: start, stop, reset, selection of batch quantity, alarm, etc. The degree of this functionality is product dependent. Additionally, most models have a hold-input feature which will ignore flowmeter pulses whilst the system is being flushed or CIP cleaned.

   Output features : Fluidwell - Panel mount Batch Controllers
■ All N-Series models have two field replaceable, heavy duty relays (NO-NC) and up to three transistor outputs. Relay 1 is fxed as the main batch control relay. Relay 2 and the transistor outputs can be configured as 1- or 2-stage batch control, alarm or pulse output.

   Power requirements : Fluidwell - Panel mount Batch Controllers
■ Two power inputs are available to power the N-Series and sensor. A 110 - 230V AC and a 24V DC power input. Both offer an 8.2, 12 or 24V DC sensor supply to power the sensor.